HP unidrivers

Paper size

The width and height values can be changed by typing numeric strings into the edit boxes in the Paper Size group box.

Any entry that is greater than the maximum limits of the width and height control is rounded down to the maximum valid entry, while any entry that is smaller than the minimum limits of the width and height control is rounded up to the minimum valid entry.

Any non-numerical entry reverts to the last valid entry. Width and height entries are validated when the focus has changed.

The resolution of the control is two decimal places for both millimeters and inches.

Units

To change measurement units, select one of the radio buttons in the Units group box (either Inches or Millimeters).

Custom width and height control limits

The minimum media size for the HP LaserJet 2410, 2420, and 2430 printer is 76.2 x 127 mm (3 x 5 inches) and the maximum is 215.9 x 355.6 mm (8.5 x 14 inches). The following table summarizes media size limits for each media-handling device.

Table 4-2PCL 6 custom media sizes

Tray

 

Dimensions

Minimum

Maximum

 

 

 

 

 

Tray 1

(multipurpose)

Width

76.2 mm (3 inches)

215.9 mm (8.5 inches)

 

 

 

 

 

 

 

Height

127.0 mm (5 inches)

355.6 mm (14 inches)

 

 

 

 

 

Tray 2

(250-sheet)

Width

Custom sizes not supported

Custom sizes not supported

 

 

 

 

 

 

 

Height

Custom sizes not supported

Custom sizes not supported

 

 

 

 

 

Tray 3

(500-sheet)

Width

Custom sizes not supported

Custom sizes not supported

 

 

 

 

 

 

 

Height

Custom sizes not supported

Custom sizes not supported

 

 

 

 

Duplexing unit

Width

Custom sizes not supported

Custom sizes not supported

 

 

 

 

 

 

 

Height

Custom sizes not supported

Custom sizes not supported

 

 

 

 

 

Use Different Paper/Covers

When the Use Different Paper/Covers check box is selected and different options are configured, the Size is:, Source is:, and Type is: menus change, offering a variety of options. For more information, see the Use Different Paper/Covers section in this chapter of the guide.

Source Is

The Source is: setting specifies the source tray to use for printing a document. The list of source trays depends on the product accessories. Any optional source trays that are installed through the Device Settings tab also appear here.

182

4 HP PCL 6, HP PCL 5e, and HP PS 3 emulation unidrivers for Windows

Page 198
Image 198
HP 2410 manual Paper size, Units, 2PCL 6 custom media sizes