Figure 4-6Front Cover options

The following Front Cover options are available:

Size is: drop-down menu

Add a Blank or Preprinted Cover check box

Source is: drop-down menu

Type is: drop-down menu

The Size is: setting specifies the media size to use for the entire print job. Changes that you make to

the Size is: setting here override any previous Size is: settings made in other Use Different Paper/ Covers options.

When you select Front Cover, you must also select the Add a Blank or Preprinted Cover check box to enable the setting. When you select this check box, the Source is: and Type is: drop-down menus become available and a check mark appears next to the Front Cover option.

The Source is: setting specifies the source tray to use for adding a front cover to the document. The list of source trays depends on the product accessories. Any optional media trays that are installed through the Device Settings tab also appear here. For more information about the Source is: setting, see the Source Is section of this chapter.

The Type is: drop-down menu shows all of the media types that the product supports. For more

information about the Type is: drop-down menu settings, see the Type is: in the Type is section of this chapter.

HP unidrivers

HP PCL 6, HP PCL 5e, and PS emulation unidriver features

185

Page 201
Image 201
HP 2410 manual 6Front Cover options