HP 2410 manual Paper/Quality tab features, Layout Options

Use the Graphics Mode feature to select one of the following settings:

■Send Graphics as Vector. Select this setting to send graphics to the product as a combination of HP Graphics Language, V2 (HP-GL/2) and raster images. This setting might produce higher- quality output.

■Send Graphics as Raster. Select this setting to send all graphics to the product as images composed of individual dots. This setting might improve printing speed in some cases. It is the default setting.

Layout Options

The Layout Option section contains the Page Order setting.

Page Order

Page Order specifies the order in which the pages of your document are printed. Front to Back prints the document so that page 1 prints first. Back to Front prints the document so that page 1 prints last. The Back to Front setting is useful if you are printing to a face-up output bin to achieve output in the correct order.

NOTE The page-ordering operation works on whole sheets of media rather than on individual logical pages. Accordingly, if you set Pages per Sheet (on the Finishing tab) to be greater than one, the ordering of logical pages on a physical sheet does not change.

Paper/Quality tab features

Use the Paper/Quality tab to specify the size, type, and source of the media. You can also use this tab to indicate different media-selection choices for the front cover, first page, other pages, last page, and back cover of the document. The following illustration shows the Paper/Quality tab.

HP unidrivers

174 4 HP PCL 6, HP PCL 5e, and HP PS 3 emulation unidrivers for Windows