HP 2410 manual Downloading the new firmware from the HP Web site

Downloading the new firmware from the HP Web site

For support information about downloading new firmware from the Web, go to www.hp.com/go/ lj2410_firmware for the HP LaserJet 2410 printer, www.hp.com/go/lj2420_firmware for the HP LaserJet 2420 printer, or www.hp.com/go/lj2430_firmware for the HP LaserJet 2430 printer.

The product can receive an .RFU update to the firmware when the product is in a READY state. The product waits for all of the I/O channels to become idle before performing the update.

NOTE If the firmware update involves a change in the format of nonvolatile random-access memory (NVRAM), any menu settings that are changed from the default settings will return to default settings. The settings must be changed again if you want them to be different from the defaults. Examples of settings that are affected in this way are tray types, default symbol sets, and Web-access alerts.

The elapsed time for an update depends on the I/O transfer time, as well as the time that it takes for the product to reinitialize. The I/O transfer time depends on a number of things, including the speed of the host computer that is sending the update and the I/O method (parallel or network). The reinitialization time depends on the specific hardware configuration of the product, such as the number of EIO devices installed, the presence of external paper-handling devices, and the amount of memory that is installed.

If the remote firmware update process is interrupted before the firmware is downloaded (while RECEIVING UPGRADE appears on the control-panel display), the firmware file must be sent again. If power is lost during the flash dual inline memory module (DIMM) update (while PERFORMING UPGRADE appears on the control-panel display), the update is interrupted and the message RESEND UPGRADE appears (in English only) on the control-panel display. The update must now be sent only by a computer that is attached to the parallel port of the product.

Finally, any print jobs that are ahead of the .RFU job in the queue are printed before the update is processed.

Use one of the following methods to update your product firmware.

Remote firmware update by using FTP through a browser

Complete the following steps to update the product firmware by using file transfer protocol (FTP) through a browser.

NOTE The following instructions can be used on Windows or Macintosh operating systems.

1Take note of the TCP/IP address on the EIO-Jetdirect page. The EIO-Jetdirect page is the second page of the configuration page printout. To print a configuration page, see Determining the current level of firmware.

2Open a browser window.

3In the address line of the browser, type ftp://<IPADDRESS>, where <IPADDRESS> is the TCP/

IP address of your product. For example, if the TCP/IP address is 192.168.0.90, type

FTP://192.168.0.90

4Locate the downloaded .RFU file for the product.

5Drag and drop the .RFU file onto the PORT1 icon in the browser window.

Software description

Technology background information 57