HP 2410 manual Postscript options, Available PostScript Memory

4Click the External Fonts option. The Properties button appears.

5Click the Properties button. The HP Font Installer dialog box appears.

6The external fonts that are installed appear in the Installed Fonts window. Select the fonts that you want to remove, and then click Remove. The fonts are removed.

7Click OK to close the Font Installer dialog box.

Postscript options

On the HP PS Emulation Unidriver Device Settings tab you will see some additional postscript configuration options. These are shown in the following illustration.

Figure 4-21Device Settings tab for the HP PS Emulation Unidriver

The postscript configuration options are described in the following sections.

Available PostScript Memory

This control specifies the amount of available postscript memory and provides a spin box for changing this value. The available postscript memory is a subset of the product total physical memory. It is usually best to set the postscript memory to match what is shown on the configuration page. To print a configuration page from the control panel, press the Select button (the one with the check mark) to open the menus. Next, press the up and down buttons to scroll to INFORMATION, and then press the SELECT button. Next, press the up and down buttons to scroll to PRINT CONFIGURATION, and then press the SELECT button.

HP unidrivers

HP PCL 6, HP PCL 5e, and PS emulation unidriver features 215