Chapter 1

To select a different mode

Press left arrow or right arrow to select the desired mode, and then press OK.

To change settings for a mode

1.After selecting a mode, press the arrow buttons to scroll through the available settings available, and then press OK to select the setting you want to change.

2.Press the arrow buttons to change the settings, and then press OK.

NOTE: Use the left arrow button or button when you want to delete an incorrect entry on the display.

Change product settings

To change the product settings or print reports, use the options available in the Setup menu:

1.Press the (Setup) button

2.Press the arrow buttons to scroll through the menus.

3.Press OK to select menus or options.

NOTE: Use the left arrow button or button when you want to delete an incorrect entry on the display.

Types of messages

While using the product, messages will appear on the control panel display. These messages provide information about the product's activity. While some types of messages just provide information about the product's status, other types of messages might require that you take the appropriate action (often specified in the message itself) before the product can continue functioning.

Status messages

Status messages reflect the current state of the device. They inform you of normal operation and require no action to clear them. They change as the state of the device changes. Whenever the device is ready, not busy, and has no pending warning messages, the status message READY appears if the device is turned on.

Warning messages

Warning messages inform you of events that require your attention, but they do not prevent the device from operating. An example of a warning message is a low ink warning. These messages appear until you resolve the condition.

Error messages

Error messages communicate that some action must be performed, such as adding media or clearing a media jam. These messages are usually accompanied by a blinking red Attention light. Take the appropriate action to continue printing.

14 Get started