HP 510PS manual Network card installation

Network card installation

HP Jetdirect network card installation

1.Before installing a card, switch off the printer and unplug it from the mains electricity supply.

2.Carefully remove the plastic cover from the left-hand rear of the printer by unclipping it. This cover gives access to the two slots for an Accessory card and a LAN card.

•Press in the thumb-tab on the side furthest from the edge that has the cable-hole.

•Ease the cover out in the direction of the embossed arrow, pivoting it by the hinge clips on the side that has the edge cable-hole.

Continued …