Setting up the I/O card

Network

With a network interface (such as the HP Jetdirect Print Server), refer to your network interface documentation for advice on any front-panel configuration. The front-panel menu is I/O Setup > Card Set-up.

To change the I/O time-out setting

Some software applications do not write a file terminator at the end of a file. In this case, the printer does not know when the file is complete and will wait for more data until the end of the “I/O Time-out” period. By default, this period is 30 minutes. You can change the time-out setting in the front-panel menu

(Set-Up > I/O setup > I/O Timeout) to as little as 30 seconds.

Page 178
Image 178
HP 510PS manual Setting up the I/O card, Network, To change the I/O time-out setting