3

Finish setting up the HP All-in-

 

One

After you have completed the steps in your Setup Guide, refer to this section to help you finish setting up the HP All-in-One. This section contains important setup-related information for your device, including information on setting preferences.

●Set your preferences

●Connection information

●Connect to a network

●Fax setup

Set your preferences

You can change the settings on the HP All-in-One so that it behaves according to your preference. For example, you can set general device preferences, such as the language used to display messages and the date and time on the display. You can also restore the device settings to what they were when you purchased your device. This will erase any new defaults you have set.

●Set your language and country/region

●Set the date and time

●Adjust the volume

Set your language and country/region

The language and country/region setting determines which language the HP All-in- One uses to show messages on the display. Usually, you set the language and country/region when you first set up the HP All-in-One. However, you can change the setting at any time by using the following procedure.

To set your language and country/region

1.Press Setup.

2.Press 7, and then press 1.

This selects Preferences and then selects Set Language & Country/Region.

3.Press or to scroll through the languages. When the language you want to use appears, press OK.

4.When prompted, press 1 for Yes or 2 for No.

5.Press or to scroll through the countries/regions. When the country/region you want to select appears, press OK.

6.When prompted, press 1 for Yes or 2 for No.

Set the date and time

You can set the date and time from the control panel. The date and time format is based on the language and country/region setting. When you send a fax, the current date and time are transmitted, along with your name and fax number, as part of the fax header.

setup Finish

User Guide

21