The name you entered will appear on your Bluetooth device when you connect to the HP All-in-One to print.

3.Press OK to exit the Setup menu.

Set Bluetooth security for the HP All-in-One

You can enable printer security settings through the Bluetooth menu on the HP All-in- One. Press Setup on the control panel, and select Bluetooth from the Setup Menu. From the Bluetooth menu, you can:

Require passkey authentication prior to someone printing to the HP All-in-One from a Bluetooth device.

Make the HP All-in-One visible or invisible to Bluetooth devices that are within range.

Use a passkey to authenticate Bluetooth devices

Set the HP All-in-One to be invisible to Bluetooth devices

Reset Bluetooth settings on the HP All-in-One

Use a passkey to authenticate Bluetooth devices

You can set the security level of the HP All-in-One to either Low or High.

Low: The HP All-in-One does not require a passkey. Any Bluetooth device within range can print to it.

Note The default security setting is Low. Low level security does not require authentication.

High: The HP All-in-One requires a passkey from the Bluetooth device before allowing the device to send a print job to it.

Note The HP All-in-One ships with a predefined passkey that is set to four zeroes "0000".

To set the HP All-in-One to require passkey authentication

1.Press Setup.

2.Press 9, and then press 3.

This selects Bluetooth and then selects Passkey.

3.Use the keypad to enter a new passkey.

Note The passkey must be 1 to 4 characters long, and can only consist of numbers.

4.When you have finished entering your passkey, press OK. The Bluetooth menu appears.

5.Press 5 to select Security Level.

6.Press OK to select High.

High level security requires authentication.

Passkey authentication is now set for the HP All-in-One.

Finish setup

User Guide

25

Page 28
Image 28
HP 6310xi manual Set Bluetooth security for the HP All-in-One, Use a passkey to authenticate Bluetooth devices