Chapter 3

6.Now you need to decide how you want the HP All-in-One to answer calls, automatically or manually:

If you set up the HP All-in-One to answer calls automatically, it answers all incoming calls and receives faxes. The HP All-in-One will not be able to distinguish between fax and voice calls in this case; if you suspect the call is a voice call, you will need to answer it before the HP All-in-One answers the call. To set up the HP All-in-One to answer calls automatically, turn on the Auto Answer setting.

If you set up the HP All-in-One to answer faxes manually, you must be available to respond in person to incoming fax calls or the HP All-in-One cannot receive faxes. To set up the HP All-in-One to answer calls manually, turn off the Auto Answer setting.

7.Run a fax test.

If you pick up the phone before the HP All-in-One answers the call and hear fax tones from a sending fax machine, you will need to answer the fax call manually.

Case I: Shared voice/fax line with answering machine

If you receive both voice calls and fax calls at the same phone number, and you also have an answering machine that answers voice calls at this phone number, set up the HP All-in-One as described in this section.

Finish setup

Back view of the HP All-in-One

1 Telephone wall jack

2 "IN" port on your answering machine

3 "OUT" port on your answering machine

4 Telephone (optional)

5 Answering machine

6 Use the phone cord supplied in the box with the HP All-in-One to connect to the "1-LINE" port

48

HP Officejet 6300 All-in-One series