HP 752c (US/CAN), 742c (US/CAN), 732c (US) To connect the network interface adapter to the network

This network connection also allows you to share printers, data, and other devices among your PCs.

Note: Your computer may not come with a network interface adapter.

Locate the RJ-45 port on the back of the computer. (Refer to the illustration that matches your system.)

RJ-45 port

To connect the network interface adapter to the network:

1Plug the network cable into the RJ-45 port on the network adapter. The port is located on the back of the computer.

Note: Do not connect a telephone cable (RJ-11 connector) to the network adapter port (RJ-45).

2Plug the other end of the network cable into a 10BaseT or a 100BaseT port on the network hub.

Note: The hub is a device to which all computers on the network are connected.

Warning: DO NOT plug the network cable into a telephone jack. Although the plug on the network cable looks similar to the plug on a telephone cable, they are not the same.

Internet

Quick Start Guide 37