Multi-Storage Bay — Peripheral Placement (Continued)
To use the chassis top to set a peripheral device, do the following:
EG
1Remove the bay cover (see step 1 on previous page).
2 Grasp the tab and pull it out toward the front of the chassis (figure E). Put the tab in its storage area in the bay near the spindle (figure F).
3 Thread the data and power cables for the device through the
cable tunnel opening at the backF of the bay. Place the cables in the
tab opening and replace the bay cover. Close the cover.
4Connect the cables to the device, and place it on the top of the chassis (figure G). At the back of the PC, connect the data cable to the USB or FireWire (IEEE 1394) connector on the back of the PC. Plug the power cord into a power outlet.
xii | HP Pavilion home PC |
