Chapter 2

5.Gently set the stack in the document feeder. Load the pages face down with the top of the pages pointing into the feeder.

For best results, do not drop the stack into the feeder and do not tap the top edge of the stack after you have placed it in the document feeder.

1If the document's longest edge is greater than 300 mm (11.8 in), load the document short edge first.

2 and 3

If the document's longest edge is less than 300 mm (11.8 in), load the

 

document either long edge first (2) or short-edge first (3).

TIP: Many documents scan faster if the longer edge is inserted first into the document feeder. However, you should avoid feeding a document with a leading edge that has been folded or frayed. When you begin scanning, select a profile whose page loading selection matches the edge you are feeding first to ensure that the scan reflects the orientation of the original document.

6.Verify that the paper guides are aligned with the edges of the stack.

10 Use the scanner