Image is printed at an angle

Verify that no problem exists with the source image. For example, if you are printing a scanned image, verify that the image was not crooked when it was scanned.

If the problem is not caused by the source image, follow these steps:

1.Remove all paper from the input tray.

2.Load the paper correctly in the input tray.

3.Verify that the paper guide fits firmly against the edge of the paper.

4.Follow loading instructions for the paper type.

Fading occurs on the edges of a photo

Verify that the photo paper is not curled. If the photo paper is curled, place the paper in a plastic bag and gently bend it in the opposite direction of the curl until the paper lies flat. If the problem persists, then use photo paper that is not curled.

For instructions about preventing photo paper from curling, see Store and handle photo paper.

Photo has an unwanted border

For small photo paper

For small photo paper with a tear-off tab

Problems with borderless documents

81

Troubleshooting

Page 83
Image 83
HP 910 manual Image is printed at an angle, Fading occurs on the edges of a photo, Photo has an unwanted border