Bluetooth module
NOTE: The Bluetooth® module spare part kit does not include a Bluetooth module cable. The Bluetooth module cable is included in the Cable Kit, spare part number
Description | Spare part number |
|
|
Bluetooth module |
|
|
|
Before removing the Bluetooth module, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 50).
Remove the Bluetooth module:
1.Loosen the Phillips PM2.0×5.0 captive screw (1) that secures the Bluetooth module compartment cover to the computer.
2.Remove the Bluetooth module compartment cover (2) by lifting it straight up.
NOTE: The Bluetooth module compartment cover is included in the Plastics Kit, spare part number
3.Release the Bluetooth module (1) from the computer as far as the Bluetooth module cable allows.
54 | Chapter 4 Removal and replacement procedures |