Description | Spare part number |
|
|
Fingerprint reader board (includes cable) | |
|
|
Before removing the fingerprint reader board, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC Adapter from the computer.
4.Remove the battery (see Battery on page 50).
5.Remove the following:
a.Hard drive (see Hard drive on page 56)
b.Keyboard (see Keyboard on page 65)
c.Switch cover (see Switch cover on page 74)
d.Display assembly (see Display assembly on page 85)
e.Top cover (see Top cover on page 90)
f.Audio/ExpressCard assembly (see Audio/ExpressCard assembly on page 97)
Remove the fingerprint reader board:
1.Remove the fingerprint reader board cable (1) from the opening in the top cover.
2.Remove the fingerprint reader board (2) by lifting it straight up. The fingerprint reader board is attached to the top cover using
94 | Chapter 4 Removal and replacement procedures |