8.Release the ZIF connector (3) to which the keyboard cable is attached, and disconnect the keyboard cable (4) from the system board.
9. Remove the keyboard.
Reverse this procedure to install the keyboard.
Primary memory module
Description | Spare part number |
|
|
|
|
|
|
|
|
Before removing the primary memory module, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC Adapter from the computer.
4.Remove the battery (see Battery on page 50).
5.Remove the keyboard (see Keyboard on page 65).
Remove the primary memory module:
1.Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The edge of the module opposite the slot rises away from the computer.)
Component replacement procedures | 67 |
