Connecting CD-Writer

1-7

7.Connecting the audio cable is OPTIONAL. If you do not wish to use it, go to step 10.

The audio cable is used only for hearing music CDs through your computer’s sound system. If you do not have a sound board in your computer, you can still hear music CDs through speakers or earphones attached to the front of the CD-Writer Plus drive.

NOTE: When the CD-Writer Plus drive records music or data, it uses the data cable, not the audio cable.

8.If you have a sound board, connect the audio cable to a LINE IN audio connector on the back of your computer. (Your sound board may be labeled differently.)

9.Connect the other end of the audio cable to the audio connector on the back of the CD-Writer Plus drive.

-CD Connecting 1: Chapter

the Installing and Plus Writer

Software

LINE IN connector on sound board (Your sound board may be labeled differently.)

Audio connector

Audio cable (optional)

10.Plug in and turn ON your computer.

11.You are now ready to install the parallel port drivers and the application software. (See “Installing the Software for Windows 95 or Windows NT 4.0” on page 1-8.)