HP C4381-90100 manual Uninstalling the Software Programs

1-12 Uninstalling the Software Programs

System does not recognize the CD-Writer Plus drive

■In Windows 95, simply click on the Connect or Disconnect external drive icon on your desktop.

Select Shuttle EPAT External ATAPI Adapter, then click Disconnect.

Restart your computer, or shut it down and then turn it on again. Watch for the green light on the front of the CD-Writer Plus drive to blink as the computer boots up

Select Shuttle EPAT External ATAPI Adapter, then click Connect.

■Make sure the CD-Writer Plus drive’s cables are connected properly.

■See “Check for a conflict with the parallel port (some other device using the same IRQ or I/O as the parallel port).” on page 1-10. For example, a sound board or fax/modem board may be using the same IRQ. If you discover a conflict(s), change the setting on the other device. Refer to the manuals that came with your computer and other devices for instructions.

■The power supply should have a steady green light when connected at both ends. If it is flashing, try a different power outlet. If it is still flashing the power supply could be damaged.

Uninstalling the Software Programs

You can remove all of CD-Writer Plus’s programs or individual programs.

CAUTION: If you want to reinstall the CD-Writer Plus drive’s software, first be sure to uninstall the original software.

1.Click the Start button.

■Point to Programs.

■Point to HP CD-Writer Plus.

■Point to Tools & Information.

■Point to Utilities.

■Click Uninstall.