b.If a support bracket is available, use cable ties to secure the housing box to the support bracket.

2.Route the ultrasonic probe to the appropriate locations along the chilled water pipe.

3.Connect the housing box to the required sources.

Callout

Component

Description

 

 

 

1

Supply temperature

Routed to the supply side of the chilled water pipe to measure temperature

2

Power connector

Connected to AC power

3

Return temperature

Routed to the return side of the chilled water pipe to measure temperature

4

Downstream flow meter

Routed to the downstream of the chilled water pipe to measure flow rate

5

Upstream flow meter

Routed to the upstream of the chilled water pipe to measure flow rate

4.After all hardware is installed, power up the components ("Power up procedure" on page 70). Installation is complete.

(Optional) Sensor Base Stations 37