1.Connect a USB connector from the PC to the USB configuration port on the inside of the Chilled Water Base Station. The PC must have the Dynasonic ULTRALINK™ software installed.

2.Open the ULTRALINK™ program.

3.When the program prompts you for a COM Port, enter the appropriate Windows®-assigned USB COM Port. To locate your COM Port, see the Device Manager screen in your Windows® operating system.

4.On the bottom, right-hand side of the home run mode screen, verify that the USB connector is communicating with the Chilled Water Base Station. A green OK indicates communication between the base station and the PC.

(Optional) Sensor Base Stations 39