4.Press and hold the UP and DOWN arrows simultaneously for a minimum of 2 seconds to exit.

Programming the voltage mode

Set the Volts Mode type according to the specific power connection type.

Power connection type

ION setting

 

 

4wire wye (4 wire, 3 phases + neutral)

4W

Direct Delta (3 wire, 3 phases, no neutral)

dELd

Programming the CT model

NOTE: All of the CTs must have the same ratings.

Set the primary and secondary transducer values:

•Primary transducer type—Ct1

•Secondary transducer type—Ct2An example of a 200A CT is:

(Optional) Sensor Base Stations 58