oRS-485 (-): Pin 4 (RJ-45 connector) to Pin 3 (RS-232 connector)

Callout

Component

Description

 

 

 

1

RJ-45 Ethernet connector

Component of the Modbus adapter

2

RS-232 connector

Component of the Modbus adapter

3

A/C power connector

Connects to the power source

4

CAT5 Ethernet connector

Connects to the network

5

Modbus adapter (RJ-45 to

Connects the RJ-45 connector to the RS-232 connector

 

RS-232)

 

6

RS-485 cable

Connects the energy meter to the Modbus base station

5.Verify that the ION power meters are configured and meet all requirements.

6.After all hardware is installed, power up the components ("Power up procedure" on page 70).

Installation is complete.

(Optional) Sensor Base Stations 56