Required tools

The following items are required for installation:

•HP Environmental Edge Installer Kit

•Ladder

•Floor tile suction lifter

•Perforated floor tile lifter

•Battery-operated label maker with: o Spare batteries

o Spare ribbon

•USB barcode scanner

•Small wire cutting pliers

•18-30 AWG wire strippers

•No. 1 Phillips screwdriver

•1/8-inch standard flathead screwdriver

•CAT5e Ethernet cable

HP Environmental Edge Installer Kit

The installer kit is provided to ease installation of the hardware components.

NOTE: Most installations do not use all items included in the Mounting Supplies Kit. Do not discard these items.

The following items are included in the HP Environmental Edge Installer Kit:

•6-in zip ties (bag of 100)

•7-in zip ties (bag of 100)

•Thermistor sensor mounting clips (100)

•Cable restraint clips

•Command strips (100)

•Double-sided tape

•Mounting tape liner

•Labels

•Alcohol wipes

For more information, see the HP Data Center Environmental Edge Installation Kit Information document.

HP Data Center Environmental Edge hardware overview 6