Manuals / HP / Computer Equipment / Computer Hardware

HP E1366A Command Quick Reference, Commands for the RF Multiplexer modules used in a switchbox

Models: E1367A E1366A

1 74

Download 74 pages 60.67 Kb

Page 60

Command Quick Reference

		The following tables summarize SCPI and IEEE 488.2 Common (*)
		commands for the RF Multiplexer modules used in a switchbox.
				SCPI Commands Quick Reference

Command				Description

ABORt				Abort a scan in progress.

ARM	:COUNt <number>			Multiple scans per INIT command.
	:COUNt? [MIN MAX]			Query number of scans.

DISPlay	:MONitor[:STATe] <boolean>			Selects monitor mode.
	:MONitor:CARD <number>AUTO			Selects module to be monitored.

INITiate	:CONTinuous ON OFF			Enables/disables continuous scanning.
	:CONTinuous?			Query continuous scan state.
	[:IMMediate]			Starts a scanning cycle.

OUTPut	[:STATe] ON OFF			Enables/disables "Trig Out" pulse.
	[:STATe]?			Query port enable state.

[ROUTe:]	CLOSe <channel_list>			Close channel(s).
	CLOSe? <channel_list>			Query channel(s) closed.
	OPEN <channel_list>			Open channel(s).
	OPEN? <channel_list>			Query channel(s) opened.
	SCAN <channel_list>			Define channels for scanning.
	SCAN:MODE NONE VOLT			Sets scan mode.
		RES FRES		Sets scan mode.

STATus	:OPERation[:EVENt]?			Returns status of Operation Status register.
	:OPERation:ENABle			Enables the Operation Status register to set a bit in the Status register.

SYSTem	:ERRor?			Returns error number/message in a switchbox Error Queue.
	:CDEScription? <number>.			Returns description of module in a switchbox
	:CTYPe? <number>			Returns the module type.
	:CPON <number>ALL			Sets specified module to its power-on state.

TRIGger	[:IMMediate]			Causes a trigger to occur.
	:SOURce BUS			Trigger source is *TRG.
	:SOURce EXTernal			Trigger source is "Event In".
	:SOURce HOLD			Hold off triggering.
	:SOURce IMMediate			Continuous (internal) triggers.
	:SOURce?			Query scan trigger source.

			IEEE 488.2 Common Commands Quick Reference

Command		Title	Description

*RST		Reset	Opens all channels, and invalidates current channel list for scanning. Sets
			ARM:COUN 1, TRIG:SOUR IMM, and INIT:CONT OFF.

*TRG		Bus Trigger	When scan is enabled and trigger source is TRIG:SOUR BUS, use the
			*TRG command to trigger the switchbox to advance the scan.

*TST?		Self-Test	Always returns 0.

60 HP E1366A/E1367A RF Multiplexers Command Reference

Chapter 5

Image 60

HP E1366A, E1367A manual Command Quick Reference, Commands for the RF Multiplexer modules used in a switchbox

Contents

Contents HP E1366A/E1367A RF Multiplexers Command Reference HP E1366A/E1367A RF Multiplexer Specifications HP E1366A/67A RF Multiplexers User’s Manual Contents HP E1366A & E1367A RF Multiplexer Modules User’s Manual Documentation History December 5 According to ISO/IEC Guide 22 and ENHP E1366A & E1367A RF Multiplexer Modules User’s Manual Measurement Systems Division Reader Comment SheetHP E1366A & E1367A RF Multiplexer Module User’s Manual Using This Chapter Getting Started with the HP E1366A/E1367A RF MultiplexersMultiplexer Module Description Multiplexers Switching Diagram Typical Configuration Specifying Scpi CommandsProgramming the Multiplexer Module AddressMultiplexer Card Numbers Multiplexer Channel NumbersInitial Operation Example RF Multiplexer Channel Lists/RangesPage Configuring the HP E1366A/E1367A RF Multiplexers Chapter Configuring the HP E1366A/E1367A RF MultiplexersConnecting User Inputs Configuring the HP E1366A/E1367A RF Multiplexers ChapterHewlett-Packard BNC Cables Typical Multiplexer Configurations Standard ConfigurationTypical Tree Configuration Matrix-Type Configuration Typical Matrix-Type ConfigurationChanging Multiplexer Components RF Multiplexer Component LocationsConfiguring the HP E1366A/E1367A RF Multiplexers Chapter Using the HP E1366A/E1367A RF Multiplexer Module Multiplexer CommandsSwitching Channels Chapter Using the HP E1366A/E1367A RF Multiplexer ModuleExample Standard Switching Using the HP E1366A/E1367A RF Multiplexer Module ChapterExample Tree Switching Tree SwitchingExample Matrix-Type Switching Query Channel States. Use CLOSe? channellist orExample Scanning Using Trig Out Port Scanning ChannelsScanning Channels Comments Scanning Channels Commands Using Scanning Trigger SourcesUnderstanding the HP E1366A/E1367A RF Multiplexers Scanning with External InstrumentsUnderstanding the HP E1366A/E1367A RF Multiplexers Chapter Scanning Trigger Sources Example Scanning with External Device Scanning with External DeviceExample Scanning Using Trig Out Event Ports Using the Scan Complete Bit Example Scan Complete InterruptHP E1366A/E1367A RF Multiplexers Command Reference Command TypesCommon Command Format Scpi Command FormatHP E1366A/E1367A RF Multiplexers Command Reference Chapter Semicolon between the commands. For example Scpi Command Reference ABORtSubsystem Syntax ABORt Example Stopping a Scan with ABORtSubsystem Syntax ARM ParametersExample Query Number of Scanning Cycles Example Enabling the Monitor Mode DISPlaySubsystem Syntax DISPlay Example Select Module #2 in a Switchbox for Monitoring ∙ Non-Continuous Scanning Operation This is enabled with ∙ Stopping Continuous Scans See the ABORt commandINITiate Example Enabling Continuous ScansExample Query Continuous Scanning State Example Enable Trig Out Port Example Query Trig Out Port Enable StateOUTPut Subsystem Syntax OUTPutROUTe Subsystem Syntax ROUTeComments ∙ Closing Channels To close Example Closing Multiplexer ChannelsComments ∙ Opening Channels To openExample Opening Channels Open Example Scanning Using External Devices Example Query Scan Mode Example Selecting Paired-Channel Scanning∙ Setting Bit 7 of the Status Register STATusSubsystem Syntax STATus ∙ Returned Data after sending the STATusOPERationEVENt?SYSTem CTYPe?Subsystem Syntax SYSTem ∙ RF Multiplexers Power-On State The power-on state is all Example Setting Card #1 Module to its Power-on StateComments ∙ RF Multiplexers Model Number Example Reading the Model Number of a Card #1 ModuleExample Advancing Scan Using the TRIGger Command TRIGgerSubsystem Syntax TRIGger ∙ Trig Out Port Shared by Switchboxes See the OUTPut command Example Scanning Using External Triggers Example Scanning Using Bus TriggersExample Query Trigger Source Ieee 488.2 Common Commands Command Title DescriptionCommand Quick Reference Commands for the RF Multiplexer modules used in a switchboxHP E1366A/E1367A RF Multiplexer Specifications Input Characteristics AC PerformanceAppendix a HP E1366A/E1367A RF Multiplexer Specifications GeneralHP E1366A/E1367A RF Multiplexer Specifications Appendix a Typical Crosstalk channel-channel Cooling/SlotEnd of Life Detection Replacement Strategy Relay LifeHP E1366A/E1367A RF Multiplexer Specifications Appendix a HP E1366A/E1367A Multiplexer Registers Appendix B HP E1366A/E1367A Multiplexer RegistersID Register Status/Control Register Channel Enable Registers Addressing the RegistersReading the Registers ID/Device Type RegistersWriting to the Registers HP E1366A/E1367A Multiplexer Registers Appendix B HP E1366A/E1367A RF Multiplexer Error Messages Appendix C HP E1366A/E1367A RF Multiplexer Error MessagesHP E1366A/E1367A RF Multiplexer Error Messages Appendix C Index HP E1366A/67A RF Multiplexers User’s Manual IndexHP-IB HP E1366A/67A RF Multiplexers User’s Manual Index HP E1366A/67A RF Multiplexers User’s Manual Index