HP FN041UAABA manual Hard drive

Hard drive

NOTE: All hard drive spare part kits include a hard drive bracket.

Description	Spare part number
500-GB, 7200-rpm hard drive	634924-001
500-GB, 5400-rpm hard drive	634632-001
320-GB, 7200-rpm hard drive	603783-001
250-GB, 7200-rpm hard drive	495059-001
160-GB, 7200-rpm hard drive	483186-001
160-GB, 7200-rpm hard drive (Seagate only)	580297-001
160-GB, 5400-rpm hard drive	514071-001
128-GB solid-state drive (SSD)	574721-001
HP Intel 80-GB solid-state drive	636545-001
80-GB solid-state drive	501113-001
Hard drive hardware kit (includes rails and screws)	634022-001

Before disassembling the computer, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 45).

Remove the hard drive:

1.Position the computer with the front toward you.

2.Loosen the two Phillips PM2.0×5.0 captive screws (1) that secure the hard drive cover to the computer.

Component replacement procedures 51