HP FN041UAABA manual Top cover, Description Spare part number

Top cover

Description	Spare part number
For use with computer models with Core2 Duo or Extreme Dual-Core processors	502335-001
For use with HP EliteBook 8530w computer models with Quad Core processors	502336-001
For use with HP EliteBook 8530p computer models	495068-001
Fingerprint reader board (includes fingerprint reader board cable)	495063-001

Before removing the top cover, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 45).

5.Remove the following components:

a.Hard drive (see Hard drive on page 51)

b.Optical drive (see Optical drive on page 47)

c.Keyboard (see Keyboard on page 61)

d.Switch cover (see Switch cover on page 66)

e.Display assembly (see Display assembly on page 69)

Remove the top cover:

1.Turn the computer upside-down, with the front toward you.

2.Remove the two rubber screw covers (1). The rubber screw covers are included in the Plastics Kit, spare part number 495076-001.

3.Remove the seven Torx T8M2.5×7.0 screws (2) that secure the top cover to the base enclosure.

76 Chapter 4 Removal and replacement procedures