Optical drive
NOTE: All optical drive spare part kits include an optical drive bezel.
Description | Spare part number |
|
|
DVD±RW and | |
|
|
|
|
|
|
Optical drive bracket | |
|
|
Before removing the optical drive, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 45).
Remove the optical drive:
1.Position the computer with the right side toward you.
2.Remove the Phillips PM2.5×12.0 captive screw (1) that secures the optical drive to the computer.
3.Push the optical drive tab (2) to release the optical drive from the computer.
4.Remove the optical drive (3) from the computer.
5.If it is necessary to replace the optical drive bracket, position the optical drive with the rear toward you.
Component replacement procedures 47
