Fan
Description | Spare part number |
|
|
For use with HP EliteBook 8530p computer models or HP EliteBook 8530w computer models | |
|
|
For use with HP EliteBook 8530w computer models with Intel QX9300 Quad Core processor | |
|
|
Before removing the fan, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 45).
5.Remove the following components:
a.Hard drive (see Hard drive on page 51)
b.Optical drive (see Optical drive on page 47)
c.Keyboard (see Keyboard on page 61)
d.Switch cover (see Switch cover on page 66)
e.Display assembly (see Display assembly on page 69)
f.Top cover (see Top cover on page 76)
Remove the fan:
1.Position the computer
2.Disconnect the fan cable (1) from the system board.
3.Remove the two Torx 8M2.5x7.0 screws (2) that secure the fan to the base enclosure.
4.Lift the front edge of the fan to remove it from (3) from the base enclosure.
Component replacement procedures 81
