4.Remove the battery (see Battery on page 45).
5.Remove the keyboard (see Keyboard on page 61). Remove the switch cover:
1.Turn the computer
2.Remove the three Phillips PM2.0×2.0 broadhead screws that secure the switch cover to the computer.
3.Turn the computer
4.Open the computer as far as possible.
5.Release the switch cover by lifting the left and right inside edges of the switch cover (1) until it disengages from the computer.
6.Lift the switch cover (2) up and forward and rest it on the computer while being careful not to disconnect the LED board cable from the system board.
Component replacement procedures 67
