8.If it is necessary to replace the display bezel or display hinges, remove the following:
(1)Four rubber screw covers on the display bezel top edge
(2)Two rubber screw covers on the display bezel bottom edge
(3)Four Phillips PM2.5×7.0 screws on the display bezel top edge
(4)Two Phillips PM2.5×7.0 screws on the display bezel bottom edge
NOTE: See Display inverter on page 49 for display inverter replacement instructions.
9.Flex the inside edges of the left and right sides (1) and the top and bottom sides (2) of the display bezel until the bezel disengages from the display enclosure.
10.Remove the display bezel (3). The display bezel is available using the following spare part numbers:
●
●
●
●
Component replacement procedures 73
