5.Remove the expansion memory module (2) by pulling the module away from the slot at an angle.

NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the memory module slot.

Reverse this procedure to install an expansion memory module.

Remove the primary memory module:

1.Spread the retaining tabs (1) on each side of the primary memory module slot to release the memory module. (The edge of the module opposite the slot rises away from the computer.)

2.Remove the primary memory module (2) by pulling the module away from the slot at an angle.

NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the memory module slot.

Reverse this procedure to install a primary memory module.

58 Chapter 4 Removal and replacement procedures

Page 66
Image 66
HP FN041UAABA manual