This section contains the following topics:

•Load an original on the scanner glass

•Load an original in the automatic document feeder (ADF)

Load an original on the scanner glass

You can copy or scan up to letter- or A4-size originals by loading them on the glass.

NOTE: Many of the special features will not work correctly if the glass and lid backing are not clean. For more information, see Clean the device.

To load an original on the scanner glass

1.Lift the scanner lid.

2.Load your original print side down in the right front corner of the glass.

TIP: For more help on loading an original, refer to the engraved guides along

the edge of the glass.

3.Close the lid.

Load an original in the automatic document feeder (ADF)

You can copy, scan, or fax a one-sided or two-sided, single- or multiple-page, A4- or letter-size document by placing it in the document feeder tray.

CAUTION: Do not load photos in the ADF; this might cause damage to your photos.

NOTE: Two-sided legal-size documents cannot be scanned, copied, or faxed using the ADF. Some features, such as the Fit to Page copy feature, do not work when you load your originals in the ADF. You must load your originals on the glass.

The document feeder tray holds a maximum of 35 sheets of plain paper.

To load an original in the document feeder tray

1.Load your original, with the print side up, into the document feeder tray. Place the pages so that the top edge of the document goes in first. Slide the media into the

Load originals

19