This section contains the following topics:

•Change the fax resolution

•Change the Lighter / Darker setting

•Set new default settings

Change the fax resolution

The Resolution setting affects the transmission speed and quality of faxed black-and- white documents. If the receiving fax machine does not support the resolution you have chosen, the HP All-in-One sends faxes at the highest resolution supported by the receiving fax machine.

NOTE: You can only change the resolution for faxes that you are sending in black and white. The device sends all color faxes using Fine resolution.

The following resolution settings are available for sending faxes: Fine, Very Fine, Photo, and Standard.

•Fine: provides high-quality text suitable for faxing most documents. This is the default setting. When sending faxes in color, the device always uses the Fine setting.

•Very Fine: provides the best quality fax when you are faxing documents with very fine detail. If you choose Very Fine, be aware that the faxing process takes longer to complete and you can only send black-and-white faxes using this resolution. If you send a color fax, it will be sent using Fine resolution instead.

•Photo: provides the best quality fax when sending photographs in black and white. If you choose Photo, be aware that the faxing process takes longer to complete. When faxing photographs in black and white, HP recommends that you choose Photo.

•Standard: provides the fastest possible fax transmission with the lowest quality.

When you exit the Fax menu, this option returns to the default setting unless you set your changes as the default.

To change the resolution from the device control panel

1.Load your originals. For additional information, see Load originals.

2.In the Fax area, press Fax Menu. The Enter Number prompt appears.

3.Enter the fax number by using the keypad, press Speed Dial or a one-touch speed dial button to select a speed dial, or press Redial/Pause to redial the last number dialed.

4.In the Fax area, press Fax Menu repeatedly until Resolution appears.

5.Press to select a resolution setting, and then press OK.

6.Press START FAX Black.

If the device detects an original loaded in the automatic document feeder, it sends the document to the number you entered.

Send a fax

55