Control panel layout

LCD control panel

1Control-panel display: The display provides information about the product. Use the menus on the display to establish product settings.

2Attention light (amber): The Attention light blinks when the product requires user attention.

3Ready light (green): The Ready light is on when the product is ready to print. It blinks when the product is receiving print data, or when the product is in sleep mode.

4Back arrow button: Use this button for the following actions:

●Exit the control-panel menus.

●Scroll back to a previous menu in a submenu list.

●Scroll back to a previous menu item in a submenu list (without saving changes to the menu item).

5Cancel button: Press this button to cancel a print job whenever the attention light is blinking or to exit the control- panel menus.

6Left arrow button: Use this button to navigate through the menus or to decrease a value that appears on the display.

7OK button: Press the OK button for the following actions:

●Open the control-panel menus.

●Open a submenu displayed on the control-panel display.

●Select a menu item.

●Clear some errors.

●Begin a print job in response to a control-panel prompt (for example, when the message Press [OK] to continue appears on the control-panel display).

8Right arrow button: Use this button to navigate through the menus or to increase a value that appears on the display.

4

Chapter 1 Product introduction

ENWW