HP M401 manual HP Device Toolbox Windows, Tab or section Description Home tab

HP Device Toolbox (Windows)

Use the HP Device Toolbox for Windows to view or change product settings from your computer. This tool opens the HP Embedded Web Server for the product.

NOTE: This tool is available only if you performed a full installation when you installed the product.

1.Click the Start button, and then click the Programs item.

2.Click your HP product group, and then click the HP Device Toolbox item.

Tab or section	Description
Home tab	● Device Status: Shows the product status and shows the approximate percent life
Provides product, status, and	remaining of HP supplies.
configuration information.	● Supplies Status: Shows the approximate percent life remaining of HP supplies.
	Actual supply life remaining can vary. Consider having a replacement supply
	available to install when print quality is no longer acceptable. The supply does not
	need to be replaced unless the print quality is no longer acceptable.
	● Device Configuration: Shows the information found on the product configuration
	page.
	● Network Summary: Shows the information found on the product network
	configuration page.
	● Reports: Allows you to print the configuration and supplies status pages that the
	product generates.
	● Event Log: Shows a list of all product events and errors.
System tab	● Device Information: Provides basic product and company information.
Provides the ability to configure the	● Paper Setup: Allows you to change the paper-handling defaults for the product.
product from your computer.	● Print Quality: Allows you to change the print quality defaults for the product,
	including calibration settings.
	● Paper Types: Allows you to configure print modes that correspond to the paper
	types that the product accepts.
	● System Setup: Allows you to change the system defaults for the product.
	● Service: Allows you to start the cleaning procedure on the product.
	● Product Security: Allows you to set or change the product password.
	● Save and Restore: Save the current settings for the product to a file on the
	computer. Use this file to load the same settings onto another product or to restore
	these settings to this product at a later time.
	NOTE: The System tab can be password-protected. If this product is on a network,
	always consult with the administrator before changing settings on this tab.

ENWW HP Device Toolbox (Windows) 65