HP M407 manual Setup, Attaching the Wrist Strap, Installing the Batteries

Setup

To locate a part on your camera (such as a button or a light) while following the instructions in this section, see Camera Parts on page 16.

Attaching the Wrist Strap

Attach the wrist strap to the wrist strap mount on the side of the camera as shown.

Installing the Batteries

1Open the Battery/Memory card door on the side of the camera by sliding the door down toward the bottom of the camera.

2Insert the batteries as indicated inside the door.

3If you want to install an optional memory card, leave the Battery/Memory card door open and go on to Installing a Memory Card (Optional) on page 11.

However, if you do not have an optional memory card to install, close the Battery/

Memory card door by pushing the door down and sliding the door toward the top of the camera until the door latches. Then skip to Turning on Power on page 12.

10 HP Photosmart M407 User’s Manual