HP M407 manual USB Configuration, Digital Camera-Causes the computer to recognize

USB Configuration

This setting determines how the camera is recognized when connected to a computer.

1In the Setup Menu (page 79), select USB.

2In the USB Configuration sub-menu, highlight one of these two choices:

•Digital Camera—Causes the computer to recognize the

camera as a digital camera using the Picture Transfer Protocol (PTP) standard. This is the default setting on the camera.

•Disk Drive—Causes the computer to recognize the camera as a disk drive using the Mass Storage Device Class (MSDC) standard. Use this setting to transfer images to a computer that does not have the HP Image Zone software installed on it (see Transferring Images to a Computer without HP Image Zone Software on page 90). You may be unable to use this setting with a Windows 98 computer that does not have the HP Image Zone software installed on it.

3Press Menu/OK to save the setting and return to the Setup Menu.

The new setting remains in effect until it is changed again, even when you turn the camera off.

Chapter 6: Using the Setup Menu 83