Resetting the Camera
If your camera does not respond when you press any buttons, try resetting the camera as follows:
1Turn off the camera.
2If you have an optional memory card installed, remove it. (Although removing an optional memory card is not necessary for performing the reset, it eliminates the memory card as a possible cause of the problem.)
3Reset the camera by removing power from it as follows:
•If you are powering the camera with only batteries, open the Battery/Memory card door and remove both batteries for approximately 5 seconds.
•If you are using only an optional HP AC power adapter to power the camera, disconnect it from the camera for at least 5 seconds.
•If you are using both batteries and the HP AC power adapter, remove both for at least 5 seconds.
4Reinsert the batteries and close the Battery/Memory card door, and/or reconnect the HP AC power adapter to the camera.
5After verifying that the camera works without an optional memory card, reinsert the card if you have one.
88 | HP Photosmart M407 User’s Manual |
