Message

Possible cause

Solution

Cannot display

The image was

z The image may still be

image

taken with

okay. Transfer the image

 

another camera

to your computer and try

 

or the image file

opening it with the

 

was corrupted

HP Image Zone software.

 

when the camera

z Do not remove the

 

was shut down

memory card when the

 

improperly.

camera is turned on.

 

 

 

Camera has

The camera may

Turn the camera off and

experienced an

have a firmware

then on again. If that does

error

problem.

not fix the problem, try

 

 

resetting the camera (see

 

 

Resetting the Camera on

 

 

page 88). If the problem

 

 

persists, note the error

 

 

code and then call HP

 

 

Support (see Getting

 

 

Assistance on page 122).

 

 

 

Unknown USB

The camera is

Make sure that the camera

device

connected to a

is connected to a

 

USB device that it

supported printer or

 

does not

computer.

 

recognize.

 

 

 

 

Chapter 7: Troubleshooting and Support

115

Page 115
Image 115
HP M407 manual Message Possible cause Solution Cannot display, Camera has, Experienced an, Error, Unknown USB, Device