HP M407 manual Connect your camera to the printer

2Connect your camera to the printer.

•If you are printing directly to an HP Photosmart printer that does not display the PictBridge logo (see logo below), use the special USB cable for connecting the camera directly to an

HP Photosmart printer.

Connect the square end of that USB cable to the HP Photosmart printer.

•If you are connecting the camera to a printer displaying the PictBridge logo (see logo on right) from HP or another manufacturer, do the following:

a.Make sure the camera’s USB Configuration setting is set to Digital Camera (see USB Configuration on page 83).

b.Using the USB cable that you would normally connect between the camera and the computer, connect the larger, flat end of the USB cable to the corresponding connector on the PictBridge printer.

3Open the rubber door on the side of the camera and connect the small end of the USB cable to the USB connector on the camera.

76 HP Photosmart M407 User’s Manual