Using the Self-Timer Settings

1Secure the camera to a tripod or set it on a stable surface.

2Press the Timer/Burst button until Self-Timer or Self- Timer - 2 Shots appears in the Image Display.

3Frame the subject in either the viewfinder or in Live View. (See Using Live View on page 30.)

4The next steps depend on whether you are capturing one or two still pictures, or are recording a video clip.

For Still Pictures:

a.Press the Shutter button halfway down to gain Focus Lock (the camera measures and then locks the focus and exposure). The camera will hold these settings until it takes the picture.

b.Press the Shutter button all the way down. If the Image Display is on, a 10-second countdown appears on the screen. The Self-Timer/Video light on the front of the camera then blinks for 10 seconds before the camera takes the picture. If you set the camera to Self-Timer - 2 Shots, after the first picture is taken, the Self-Timer/ Video light blinks for a few more seconds until the second picture is taken.

NOTE If you immediately press the Shutter button all the way down without using Focus Lock, the camera will lock focus and exposure just before the end of the 10-second countdown. This is useful when one or more subjects will be entering the picture during the 10-second countdown period.

NOTE You cannot record audio with a still picture when using the Self-Timersettings, but you can add an audio clip later (see Record Audio on page 61).

Chapter 2: Taking Pictures and Recording Video Clips

41

Page 41
Image 41
HP M407 manual Using the Self-Timer Settings, Secure the camera to a tripod or set it on a stable surface