HP M407 manual Blinking, Macro

Message	Possible cause	Solution
PROCESSING...	The camera is	Wait a few seconds for the
	processing data,	camera to finish
	such as saving	processing before taking
	the last picture	another picture or pressing
	you took.	another button.
CHARGING	The camera is	It takes longer to charge
FLASH...	recharging the	the flash when the battery
	flash.	is low. If you see this
		message a lot, you may
		need to replace or
		recharge the battery.
FOCUS TOO FAR	The focus	z Change the shooting
and blinking	distance is	mode (see Using the
	beyond where the	Shooting Modes on
	camera can focus	page 38).
	in the Macro	z Move closer to the
	shooting mode.	subject, within the range
		of the Macro shooting
		mode (see Using the
		Shooting Modes on
		page 38).
FOCUS TOO	The focus	Move farther away from
CLOSE	distance is closer	the subject, within Macro
	than the camera	range (see page 38).
	can focus in the
	Macro
	shooting mode.

Chapter 7: Troubleshooting and Support 113