HP M407 manual For Video Clips, Icon for the Self-Timer setting Self-Timer or Self-Timer

For Video Clips:

To start recording video, press the Video button and then release it. If the Image Display is on, a 10-second countdown appears on the screen. The Self-Timer/Video light on the front of the camera then blinks for 10 seconds before the camera starts recording the video.

NOTE With either the Self-Timer or the Self-Timer - 2 Shots setting, only one video clip is recorded after the 10- second countdown.

To stop recording the video clip, press the Video button again; otherwise, the video will continue recording until the camera runs out of memory.

The icon for the Self-Timer setting (Self-Timer or Self-Timer -

2 Shots ) will appear in the Live View screen. The Self-Timersetting resets to the default Normal setting after the picture is taken.

NOTE To restore the Timer/Burst setting to what it was when you last turned the camera off, hold down the Menu/OK button as you turn the camera back on.

42 HP Photosmart M407 User’s Manual