HP M407 manual Configuring the Camera as a Disk Drive

Configuring the Camera as a Disk Drive

This method sets up your camera to function as a disk drive when it is connected to your computer.

NOTE You may be unable to use this method with Windows 98 computers.

1Set your camera to Disk Drive mode (you only need to do this step once):

a.Turn the camera on, then press the Menu/OK button to display the Capture Menu.

b.Use the button to navigate to the Setup Menu .

c.Use the button to highlight the USB menu option, and then press Menu/OK.

d.Use the button to select Disk Drive, and then press Menu/OK.

e.Use the button to highlight EXIT, and then press Menu/OK.

2When you have set your camera to Disk Drive mode, connect the camera to your computer using the USB cable.

3At this point, the process for transferring images is the same as described in the section Using a Memory Card Reader on page 90. On Windows computers, the camera will appear as a removable disk in the Windows Explorer screen. On Macintosh computers, either the Image Capture or iPhoto application will launch automatically.

4When you have finished transferring images from the camera to the computer, simply disconnect the camera from the computer. If your computer is running Windows 2000 or XP, you may get an “Unsafe Removal” warning upon disconnecting the camera. You can disregard this warning.

Chapter 7: Troubleshooting and Support 93