CLI commands

<internal addr> IP address of the device on the internal network that traffic will be routed to.

<internal-port>The protocol port number that the incoming traffic will be mapped to.

ip rip authentication key-chain

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

ip rip authentication key-chain <name>

Specifies a keyed MD5 chain.

no ip rip authentication key-chain

Do not use this Keyed MD5 chain.

ip rip authentication mode

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

ip rip authentication mode (md5 text)

Select RIPv2 authentication mode.

no ip rip authentication mode

Use no RIPv2 authentication.

ip rip authentication string

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

ip rip authentication string <secret>

Sets the RIP shared password.

no ip rip authentication string

Clears the RIP shared password.

passive-interface

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

passive-interface

Sets RIP to operate in passive mode (listen for routing broadcasts to update the routing table, but do not broadcast own routes).

no passive-interface

Sets RIP to operate in active mode (listen for routing broadcasts to update the routing table, and also broadcast own routes).

router rip

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

router rip

Enable RIP.

no router rip

Disable RIP.

2-82