CLI commands

force centralize data

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

force centralize data

Force centralization of wireless client traffic when the AP is L2 connected to the LAN port of the service controller.

no force centralize data

Automatically determine if centralization of wireless client traffic is required.

ingress interface

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

ingress vlan <name>

Sets the specified interface as the ingress interface traffic will be accepted on.

This command takes a selector as its input. A selector is used to differentiate traffic, and decide which parameters should be used to select the VAP (VSC) this user/traffic applies to.

egress unauthenticated

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

egress ( unauthenticated authenticated intercepted ) ( default vlan <vlan­ name> gre <gre-name>)

Sets the output interface that this profile forwards data traffic to.

Parameters

unauthenticated

This is any traffic from client stations that have not attempted to be

 

authenticated by the service controller. For example, a client station that

 

fails to authenticate via 802.1x is not considered to be unauthenticated.

authenticated

This is any traffic from client stations that have been authenticated by the

 

service controller and given access to the public access interface.

intercepted

Traffic from specific users can be intercepted and redirected. To enable

 

traffic interception for a specific user, you must specify the appropriate

 

setting in the their RADIUS account. See the Management and

 

Configuration Guide for details.

default

Sends traffic without specifying a specific interface. The interface that is

 

used will be selected by the routing module based on the traffic destination

<vlan-name>

Sends traffic tagged with the VLAN ID defined for the specified VLAN

 

name.

<gre-name>

Sends traffic on the specified GRE tunnel.

guest-mode

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

guest-mode

Enables broadcast of the wireless network name (SSID).

no guest-mode

Disables broadcast of the wireless network name (SSID).

2-88