CLI commands

snmp-server readwrite

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

snmp-server readwrite <community>

Sets the read-write community string.

no snmp-server readwrite

Deletes the read-write community string.

snmp-server trap

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

snmp-server trap

Enables support for SNMP traps.

no snmp-server trap

Disables support for SNMP traps.

snmp-server trap community

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

snmp-server trap community <str>

Sets the password required by the remote host that will receive the trap.

no snmp-server trap community

Deletes the password required by the remote host that will receive the trap.

snmp-server trap destination

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

snmp-server trap destination <host> <[port number]>

Add a new trap destination.

no snmp-server trap destination <host> [<port>]

Deletes the specified trap destination.

Parameters

<host>

 

Sets the IP address or domain name of the host that the service controller

 

 

will send traps to.

<[port

number]>

SNMP port number. Range 1 - 65535. By default port 162 is used

snmp-server trap heartbeat

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

snmp-server trap heartbeat

Enables sending of heartbeat traps at regular intervals.

no snmp-server trap heartbeat

Disables sending of heartbeat traps at regular intervals.

2-25