CLI commands
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
Enables scheduled firmware upgrades.
no
Disables scheduled firmware upgrade.
The service controller can automatically retrieve and install firmware from a local or remote URL at preset times. By placing service controller firmware on a web or ftp server, you can automate the update process for multiple units.
When the update process is triggered the service controller retrieves the first 2K of the firmware file to determine if it is different from the active version. If different, the entire firmware file is then downloaded and installed.
(Different means older or newer. This enables you to return to a previous firmware version if required).
Configuration settings are preserved during the update unless stated otherwise in the release notes for the firmware. However, all active connections will be terminated. Users will have to log in again after the service controller restarts
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
Upload the firmware based on a specified URI. This URI can be set with the command: firmware- update uri.
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
Sets the time of day the scheduled firmware upgrade will take place.
Parameters
<time> | Time as hh:mm:ss. For example: 15:44:00. |
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
Sets the URI where the service controller will retrieve new firmware.
no
Clears the firmware URI.